CEMO CM20 Installations- Und Benutzerhandbuch Seite 40

2.3.2. User TAGs
Used to identify the vehicle and / or the driver. They allow
refueling and delivery tracking.
2.3.3. MASTER card
The MASTER card allows the manager to operate on the
system to obtain reports on the supplies made, code badges,
update tank stocks, deactivate badges, modify certain counters
and operating parameters.
2.3.4. DATA cards
DATA cards allow manual downloading of transactions
stored in the CM20 and their transfer to the PC when there is no
internet connection.
The copy to the PC is done using the RFID reader which
transfers the data from the CM20 previously copied to a DATA
card.
2.3.5. Software
The software is included in the CM20, its functionalities
allow to:
• acquire the CM20 supplies
• manage the driver and vehicle database
• analyze fuel consumption
3. Installation manual
3.1. Installation & mounting: WARNING
The CM20 is intended for use with a single-phase
220VAC electrical network. Therefore, all local safety rules and
regulations must be observed.
Dangerous live parts are present in the device.
Misuse of these devices can therefore lead to death, serious
injury or considerable damage to property! For these reasons,
the installation instructions must be strictly followed.
The CM20 must arrive in its original packaging,
protected by a special shock absorbing material. If there are
obvious signs of damage, contact the supplier, as the product
may not be compliant.
Avoid contact between the CM20 and water
sprays.
The CM20 can only be opened by qualified
personnel. An electric shock could result in death or serious
injury. Always disconnect the supply voltage before opening the
device.
2