Beemoo PRO MULTI 2 Bedienungsanleitung Seite 10

UK
7-5. To adjust the seats recline position, press down the buttons on
each sides of the seat downwards and tilt the seat to the desired
position.
7-6. To adjust the position of the footrest, press the buttons on both
sides of the footrest downwards and tilt the footrest to the desired
position.
7-7. Place your child in the stroller, with the crotch strap between the
child's leg. Tighten the waist strap and shoulder strap.
7-8. Fit the harness clips together. Slide the right clip into right buckle
until you hear a click.
7-9. Slide the left clip into left buckle until you hear a click. Pull the
harness to make sure it is secured.
7-10. To release the harness, press the harness release buttons.
USING THE CANOPY
8-1. Adjust the length of the canopy by pulling the canopy. For addition-
al extension, unzip the zipper and fold the extension out. The sun
cap can be attached for additional canopy length.
8-2. Lift the lid of the canopy for viewing the child in the stroller, and for
additional airflow.
10