Operating Tips - Riello Cronoriello Rc3 Anleitungen Für Betreiber, Installateur Und Technischer Kundendienste

ENGLISH
Navigate and set using the control knob
To go to the navigation bar:
Turn control knob: Preselect the symbol on the navigation bar.
The related topic page is displayed in the work area.
Push control knob: Selects the topic page.
The first adjustable operating object of the work area is preselected.
Go back using the Back arrow on the navigation bar.
To set values in the work area:
Turn control knob: Preselect operating object.
Push control knob: Selects the operating object.
The lower level is displayed if the operating object consists of multiple levels (e.g.
time program).
Set value.
Confirm the set value.
The set operating object is again framed (preselected).
Continue navigation
To go to other pages, on the selected page title
l
"Back" within the work area
l
Back arrow to return to navigation bar
l

Operating tips

Editing timeout 5 seconds
Locking timeout 1 minute
Operating 8 minutes
timeout
The most important features at a glance
A changed setting reverts to the original state if no
confirmed within this period.
Certain plant states are displayed in the foreground, e.g.
special mode page. However, users are still able to go to
any page and set values. The foreground page returns
after this period without operator intervention.
After this period without operation, display automatically
returns to the start page.
13
ENGLISH
7