VEVOR A02 Bedienungsanleitung Seite 7

3.The filling speed can be adjusted by adjusting the inlet and outlet
throttle to change the inlet and outlet air volume.
Inlet Throttle
Outlet Throttle
4.Adjust the filling volume:
1). Loosen the nut.
2). Adjust the adjusting screw length to determine h, h corresponds to the
filling volume.
3). After adjusting to the filling volume, tighten the nut.
5.After the above steps are completed, turn on the air source switch,you
can fill by stepping on the pedal switch.
Note:Press the air source switch to open, pull up the air source switch to
close.
- 6 -