Overmax Multipic VEER Bedienungsanleitung Seite 18

3. Use an eyeglass tissue or soft cloth to clean the projector lens to avoid
scratches.
4. Regularly clean the projector's vents and speakers with a soft brush to
EN
prevent blockage and ensure proper ventilation.
5. Clean the filter regularly.
TROUBLESHOOTING
Problem
The projector does not turn on
when the switch is pressed.
The remote control does not
work when operating the
projector.
No image.
Automatic shut-o .
The photos are for illustrative purposes only, the actual appearance of the products
Possible causes
• The power cord is not properly connected.
• The switch is faulty.
• The remote control has no batteries or the
batteries are depleted.
• Incorrect input source.
• No input signal.
• The input cable is not connected.
• The projector's ventilation is blocked.
• The voltage is not stable.
• The projector has overheated. Check to ensure
the fan is functioning properly.
may di er from that shown in the photos.