Overmax Multipic VEER Bedienungsanleitung Seite 14

8. Be careful when using the power cord, avoid excessive
bending of the cord; damage to the power cord can
cause electric shock or fire.
EN
9. Do not look into the lens while the device is operating.
10. It is recommended to switch o the device after 6 hours
of continuous operation.
11. Unplug the power cord after switching o
supply.
12. It is advisable to use the original packaging to transport
the device.
13. Do not place any objects on the projector.
14. Do not expose the projector to sunlight.
15. Do not use the projector in a humid environment.
16. Store the projector only in a dry environment with
moderate temperatures.
17. The device is intended for domestic use only. Do not use it
for any other purpose incompatible with its intended use.
WARNINGS FOR REMOTE CONTROL BATTERIES
1. Disposable, non-rechargeable batteries should not be
charged.
2. Avoid mixing di erent types of batteries or combining
new and used batteries in the device.
3. Ensure batteries are inserted with the correct polarity.
4. Remove used batteries from the product.
5. The power supply terminals must not be short-circuited.
6. If the product is not used for a long period of time,
remove the batteries from the compartment.
DESCRIPTION OF PARTS (FIG. A)
1.
ON/OFF switch
2.
USB port
3.
HDMI port
4.
Audio input 3.5 mm
5.
Charging port
6.
Ventilation grille
7.
Filter
8.
Air outlet
9.
Swivel base
10.
Focus adjustment knob
11.
Lens
12.
Charger
the power