Overmax Multipic VEER Bedienungsanleitung Seite 17

CONNECTION TO WI-FI NETWORK
To connect to the Wi-Fi network, press the Menu button on the remote
control (11, Fig. B), enter the "Network" icon by pressing the confirmation
EN
button on the remote control (10, Fig. B). Select the network from the list,
enter the password, and confirm.
CONNECTION TO EXTERNAL MEDIA SOURCE
The projector allows images to be projected from a variety of devices.
Depending on the device, use the appropriate input at the top of the
housing:
USB input (2, Fig. A) – for devices such as USB flash drives and external
hard drives.
HDMI input (3, Fig. A) – for devices such as computers, laptops, consoles,
satellite receivers, and phones (supporting MHL technology and only via
dedicated MHL cable).
MIRACAST (FOR ANDROID DEVICES)
Press the Menu button on the remote control (11, Fig. B). Enter the "App"
icon by pressing the confirmation button on the remote control (10, Fig. B),
and select the Miracast app.
Ensure both the projector and mobile phone are connected to the same Wi-
Fi network.
Open your chosen screen mirroring app, or select this feature on your phone,
and connect to your device by selecting "Multipic Veer".
IOS CAST
Press the Menu button on the remote control (11, Fig. B). Enter the "App"
icon by pressing the confirmation button on the remote control (10, Fig. B),
select the IOS Cast app, and follow the instructions on the screen.
NIGHTSKY MODE
To activate the star projector mode, press the NightSky star projector switch
(2, Fig. B). To change the image, press the selection buttons (3 and 4, Fig. B).
To deactivate the star projector mode, press the back button (13, Fig. B).
AMBIENTE MODE
To access the Ambiente mode, press the button (5, Fig. B). To change, press
the Ambiente mode switch again. To deactivate the Ambiente mode, press
the back button (13, Fig. B).
CLEANING
1.
Before cleaning the device, unplug the power cord.
2. Clean the housing regularly with a damp cloth.