Sangean U5 DBT Bedienungsanleitung Seite 7

h.
Time
displays the current time.
i.
Date
displays the current date.
Finding new stations – DAB
As time passes new stations may become available. To
find new stations proceed as follows:
1.
To carry out a full scan of the entire DAB Band III
frequencies press and release the Auto tune button.
2.
As new stations are found, the
station counter on the right hand
side of the display will increase and stations will be
added to the list.
Manual Tuning – DAB
GB
Manual tuning allows you to tune directly to the various
DAB band III channels.
1.
Press the Menu button to access DAB menu.
F
2.
Rotate the Tuning control knob to
find "Manual tune".
Press and release the Tuning
control knob to enter DAB channels
E
in the list. Rotate the Tuning control
knob to select required DAB channel. When required
DAB channel is found, press and release the Tuning
control knob to select the required DAB channel.
NL
Dynamic Range Control (DRC) setting –
DAB
D
DRC can make quieter sound easier to hear when your
radio is used in a noisy environment.
1.
In DAB band, press the Menu button to access DAB
menu.
2.
Rotate the Tuning control knob to
find "DRC ". Press and release the
Tu n i n g c o n t r o l k n o b t o e n t e r
adjustment mode.
3.
Rotate the Tuning control knob to
s e l e c t r e q u i r e d D R C s e t t i n g
(default is off).
DRC off DRC is switched off,
Broadcast DRC will be ignored.
DRC high DRC is set as sent by
broadcaster.
DRC low DRC level is set to 1 / 2 that sent by
broadcaster.
4.
Press and release the Tuning control knob to confirm
the setting.
NOTE
Not all DAB broadcasts are able to use the DRC function.
If the broadcast does not support DRC, then the DRC
setting in the radio will have no effect.
Station order setup
Your radio has 2 station order settings from which you can
choose. The station order settings are alphanumeric and
ensemble.
06
sunshine live
The default station order on your radio is alphanumeric.
9:07 AM
sunshine live
1.
Press the Power On / Off button to switch on your radio.
8-9-2016
2.
Press the Source button to select DAB band.
3.
Press the Menu button to access DAB menu.
4.
Rotate the Tuning control knob until
the display shows "Station order".
Press the Tuning control knob to enter the station order
adjustment mode.
5.
Rotate the Tuning control knob to
c h o o s e " A l p h a n u m e r i c " o r
Scanning... 019
"Ensemble".
"Alphanumeric" -sorts the station
list alpha-numerically 0...9 A...Z.
"Ensemble" – sorts the station list by DAB multiplex.
The current setting is indicated by an asterisk.
6.
Press the Tuning control knob to select the required
station order.
Prune stations
DAB If you move to a different part of the country, some of the
<Manual tune >
stations which were listed may no longer be available.
Manual tune
Also from time to time, some DAB services may stop
<5A 174.928MHz >
broadcasting, or may change location or frequency.
Stations which cannot be found, or which have not been
received for a very long time are shown in the station list
with a question mark. The prune stations function will
delete the marked DAB stations from your station list.
1.
Press the Menu button to access DAB menu.
2.
Rotate the Tuning control knob to
find "Prune". Press and release the
Tu n i n g c o n t r o l k n o b t o e n t e r
adjustment mode. Then rotate the
Tuning control knob to select "Yes"
or "No". To activate the Prune function select "Yes", and
press and release the Tuning control knob to confirm
DAB
the setting.
<DRC >
3.
If you do not wish to prune stations,
select "No" and then press and
release the Tuning control knob to
DRC *
confirm the setting.
<DRC off >
DRC
If you have moved your radio to a different part of the
<DRC high >
country you should also carry out a search for new
DRC
stations (please see the section 'Finding new stations').
<DRC low >
Operating your radio – FM
1.
Straighten the antenna properly above the radio. Press
the Power On / Off button to switch on your radio.
2.
Press the Source button to select FM waveband.
3.
To scan up in frequency, first rotate the Tuning control
knob in a clockwise direction and then press the
Auto tune button. Your radio will scan in an upwards
direction (low frequency to high frequency) and stop
automatically when it finds a station of sufficient
strength. To scan down in frequency, first rotate the
Tuning control knob in a anti-clockwise direction and
then press the Auto tune button. Your radio will scan
NOTE
NOTE
DAB
<Station order >
Station order *
<Alphanumeric >
Station order
<Ensemble >
DAB
<Prune >
Prune?
<Yes> No
Prune?
Yes <No>