Werbung
WIRELESS CONNECTION SETUP
CONSOLE
1. Turn on the console.
2. Plug the USB data cable into HEXAGON and console.
3. Press and hold the "N" button, the LED bar lights up, then
your controller is connected.
4. For future connections, you can press the "N" button on the
controller and it will automatically log into the console.
Note
To connect HEXAGON to the console, you need a USB data
cable to Type-C.
After the initial pairing, the data cable is no longer required.
PC, IOS® & ANDROID®
1. Switch on the device/PC and your Bluetooth® feature.
2. Activate the Bluetooth® search mode of your device/PC
by clicking on "Add New Bluetooth® Device".
3. Press and hold the "N" + "SHARE" buttons for a few
seconds until the LED front bar starts flashing quickly.
4. Choose "Wireless controller" and tap "Pair" on your
device/PC to connect HEXAGON.
5. The front LED bar light will stop flashing and your
controller will be connected.
TROUBLESHOOTING
If you are unable to connect the HEXAGON controller to
the console or device/PC, press the Reset button located in
the small hole in the rear of the controller.
Werbung
