Herunterladen Inhalt Inhalt Diese Seite drucken

Function; Hot Water Requirement; Saving Energy - Austria Email EKH-S Bedienungsanleitung

Druckfester warmwasserberreiber
Vorschau ausblenden Andere Handbücher für EKH-S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. FUNCTION

The domestic water stored in the enamelled internal boiler is heated up by the electrical heating element.
The user can preselect the desired temperature on the settings knob. The heating is independently
switched on by the temperature regulator during the heating up times specified by the electric supply
company responsible and switched off again after reaching the desired stored water temperature. If
the water temperature drops, for instance due to water abstraction or natural cooling (the high-quality
CFC-free polyurethane foam insulation keeps it as low as possible), the device switches itself back on
again until the stored water temperature is reached.

2. HOT WATER REQUIREMENT

Hot water consumption in the household is dependent upon the number of people, the sanitary fittings
in the flat or house, the insulation, the plumbing and the individual habits of the user.
The following table provides a few standard values for consumption.
Full bath
Shower
Hand wash
Hair wash (short hair)
Hair wash (long hair)
Bidet utilisation
Washing dishes
for 2 people per day
for 3 people per day
for 4 people per day
Housework/per bucket of cleaning water
The temperature of the cold water required for mixing for the stated hot water temperature was
assumed to be c. 12°C.

3. SAVING ENERGY

Our electrical storage system is a real energy saver due to its high quality, CFC-free polyurethane foam
insulation and its built-in temperature regulation system.
Low storage water temperatures turn out to be particularly economical. That is why the level of the
continuously variable temperature adjustment should only be set in accordance with the actual hot
water requirements. This helps save energy and reduces limescale build-up within the container.
24 |
Id.Nr.:243701-0
Hot water requirement
in litres
at 37°C
at 55°C
150 - 180
30 - 50
3 - 6
6 - 12
10 - 18
12 - 15
16
20
24
10
Required amount of storage water
in litres
with 80°C
55 - 66
11 - 18
1 - 2
3 - 4,4
3,7 - 6,6
4,4 - 5,5
10
12,5
15,2
6,3
with 60°C
78 - 94
16 - 26
1,6 - 3,1
4,2 - 6,3
5,2 - 9,4
6,3 - 7,8
14
18
21,5
9

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ewh

Inhaltsverzeichnis