Beemoo ONE Bedienungsanleitung Seite 19

CARRYCOT SET UP
• Open the zipper inside of carrycot, remove the liner and reveal the
bottom structures.
• Pull the tab on both supporting wire outward until they are fixed firmly
to all four clips on the bottom.
• Zip-up the liner and lay the mattress flat.
• Pull the canopy forward while pressing the button on both sides until
it is upright.
IMPORTANT!
• The child's head should be higher than his body in the carrycot.
• Make sure the handle is in the correct position before carrying
or lifting.
• Carrycot must be used in conjunction with the adaptors.
CARRYCOT ATTACHMENT ON CHASSIS
• Fit the adaptors to the brackets on both sides on chassis.
• Place the carrycot down while aligning the latch of adaptor. A "click"
sound indicates the carrycot is correctly installed.
• To remove the carrycot, press the buttons on both adaptors while
lifting the carrycot.
IMPORTANT!
• ALWAYS remove your child from the bassinet/carrycot before
installing on or removing from the stroller frame.
• The carrycot must always face towards the handle.
• The carrycot must be removed from the frame before folding.
• Do not lift the stroller by the bassinet/carrycot.
• The parking device shall be engaged when placing and
removing children.
UK
19