Beemoo ONE Bedienungsanleitung Seite 12

UK
Please refer to the page where the corresponding assembly images are
listed. You can find the numbered images on the separate page for easy
reference and identification.
ASSEMBLY
1. Unpack the pushchair frame from the box and set the wheels aside.
Lift the handlebar away from the lower frame. The pushchair will click
into place.
Press the adjusting button on top of handle bar for different heights if
need.
WARNING: Ensure that all the locking devices are engaged before use.
2. Attach the front wheel by sliding it into the front wheel mount until it
clicks.
Note! pull on the front wheel to make sure it is properly attached.
3. Install the rear wheel by inserting the rear wheel axle into the wheel
mount on the chassis.
Gently pull on the front wheel to make sure it is properly attached.
To remove front or rear wheel:
While pressing the removal button, gently slide the wheel out of wheel
mount.
4. Install the bumper bar by aligning both ends to bumper bar sockets and
push until it clicks into place.
To detach, pull outward gently while pressing the removal button.
5. Install the seat unit:
- Align the seat mounting brackets with the mounting brackets on the
pushchair frame.
12