VEVOR RC-1836 Bedienungsanleitung Seite 6

STEP 2:
For this step you'll need 2 uprights (Part C), 2 Philips head screws, and the
assembled parts A/B you just created from steps above.
We will now attach an upright to each side of the logo plate. These will
attach like the legs above did. Slide the upright tube over the logo plate
tube and line up the holes. Insert a Philips head screw and tighten with
Philips screw driver. Repeat for the other upright. See pictures below for
clarification.
- 5 -