Beatbot AquaSense 2 Pro Bedienungsanleitung Seite 8

5 Robot Buttons
Power Button
Short press to turn the robot on, and press and hold for about 3s to turn it off.
Mode Button
Short press the corresponding mode button to switch.
Floor Mode (
(Press and hold for about 3s to enable the dispensing of clarifier.)
Standard Mode (
Pro Mode (
Custom Mode (
the App. Once your settings are successfully configured in the App, they will sync with this
mode button.
EN EN
Hotspot Configuration
Press and hold both the "Power (
about 3s to trigger the hotspot configuration.
Factory Reset
Press and hold the "Standard Mode (
simultaneously for about 10s to restore the factory settings.
6 Lighting Effects
* During the charging process, the light color reflects the current battery level.
1 2
3
): Clean the floor;
1
): Clean in the order of floor, walls and waterline;
2
): Clean in the order of floor, walls, waterline and surface;
4
): You can set the cleaning area and duration according to your needs via
5
Solid green light
Solid yellow light
Solid orange light
Solid purple light
Flashing orange light
Flashing blue light
Breathing light
3
)" and "Floor Mode (
3
)", "Power ( )" and "Pro Mode (
2 3
Battery sufficiently charged
Battery low
Battery nearing depletion
Clarifier dispensing
Robot malfunction
Network configuring/OTA upgrading
Charging
6
4 5
)" buttons simultaneously for
1
)" buttons
4
5