Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10
Storage
Find an appropriate indoor storage space that is cool, dry, and shielded from direct
sunlight, rain, frost.
Keep the robotic pool cleaner away from extreme temperatures, open flames, and
places accessible to children.
Properly protect it from dust when stored for a long period of time.
Power off and disconnect it from the power source when storing. Please check the
battery level at least every 6 months and charge the battery to around 50%.
After each use, ensure that the water inside the robot has been completely drained out
and that it is dry. To enable draining, press and hold the "Pro Mode" button for 3
seconds. Please wait for about 3 minutes for the robot to finish draining.
11
FAQ
11.1 Why does the robot not move or move slowly at the pool floor?
11.2 Why does it take so long for the robot to enter the water?
The robot needs some time to release the air in the buoyancy chamber when it enters the
water. Please wait patiently for about 3 minutes.
11.3 Why is the robot offline?
Weak Wi-Fi signal: The robot may be too far from the Wi-Fi signal range or could have
entered the water, causing the network to disconnect. The robot will reconnect auto-
matically once the signal is restored.
Robot shutdown: The robot automatically shuts down when the battery runs out. After
charging and powering it on, the robot will reconnect automatically.
Robot connected by another account: The robot may be connected to another user's
account. You can reset its Wi-Fi settings and reconnect.
Router related: If the router is rebooting, if there are changes to the router's Wi-Fi name
or password, or if the router has blacklisted the device, please address these issues first
to determine if the device comes back online. If the issue persists, reset the Wi-Fi and
reconnect.
13
EN
Werbung
