Beatbot AquaSense 2 Pro Bedienungsanleitung Seite 11

8.2 Charging
Install the charge dock
Push the bracket from the bottom up into the groove on the back of the charge dock
( ). It is properly installed when you hear a "click"(
1
Connect the power supply
Plug into the power source (
Charge the robot
Place the robot on the charge dock (
shows a breathing light (
1 1
3 3
Tips
Before using the robot, please make sure it is sufficiently powered.
The charging temperature is 0~ 40℃ /32~104°F. While charging, it is recommended to keep the
robot within the Wi-Fi coverage area and away from moisture and direct sunlight.
).
3
). When the panel indicator on the robot
4
), it means the robot is charging.
5
2 2
4 4
9
).
2
5 5
EN