Beatbot AquaSense 2 Pro Bedienungsanleitung Seite 10

8 Product Operation
8.1 Installation of Clarifying Agent Kit
Open agent kit cover of the robot (
Take out the clarifying agent kit and remove the cap (
Tear off the aluminum film on the interface of the kit (
Position the kit onto the robot with the interface facing downwards. Gently but firmly
press it into place until you hear a "click" sound or a voice prompt. Then, close the
cover (
4
Press and hold the "Floor Mode" button for about 3s to activate the clarifier dispens-
ing. The purple light on the robot indicates a successful activation. Press and hold the
button for about 3s again to deactivate it (
1
EN
3
5
).
).
1
).
2
).
3
).
5
2
4
8