Battery Change - Jab Qmotion Meridian-E Rollo Montage- Und Programmieranleitung

How can I delete a remote control / a channel?
Blind has to be in the upper end position!
o
1. Press the programming button on the reverse (single-channel remote control twinkles,
multi remote control shows running light)
2. Press the up button and hold until motor moves downwards
Ï
3. Pull the blind at least 15 cm downwards, motor reacts (up-down movement).
4. Press the programming button on the reverse (single-channel remote control twinkles,
multi remote control shows running light)
5. Press the down button, motor reacts! (up-down movement, then blind pulls up,
and again up-down movement)
BACK TO FACTORY SETTINGS
How can I set the roller blind back to factory settings?
You have several meridian-E blinds on one channel of the remote control, but want to set back just
one or not all blinds?
Only meridian-E blinds where step 3 is executed will be set back. The other meridian-E blinds will
move according to the pushed button, but they won't be adjusted.
Blind has to be in the upper end position!
1. Press the programming button on the reverse (single-channel remote control twinkles,
multi remote control shows running light)
2. Press the down button and hold until motor moves downwards
3. Pull the blind at least 15 cm downwards, motor reacts (up-down movement).
4. Now start within 60 seconds with the programming of the first hand-held transmitters
meridian-E | MAINTENANCE

BATTERY CHANGE

How can the batteries be changed?
1. Remove the end caps and the front blind of the cassette (see below). Pull the meridian-E blind shortly
over the lower end position and let it go again. The meridian-E blind moves back to the lower end
position.
2. Pull the meridian-E blind again approx. 15 cm above the lower position. The meridian-E blind moves now
to the 75% position (or rather to the lowest customer-specific position). Now you can pull down the
meridian-E blind until you can see the battery box.
3. Remove the battery box cover and change the batteries.
We recommend: Battery LR20D for meridian-E blind
4. Put the battery box cover on a level and push any button of the remote control. The meridian-E blind
moves into the prevailing position.
EN | 22