Manual Operation - Jab Qmotion Meridian-E Rollo Montage- Und Programmieranleitung

meridian-E | OPERATION

MANUAL OPERATION

The meridian-E blind should move to the upper end-position:
• pull the meridian-E blind down shortly (25 – 50 mm) or
• pull the meridian-E blind two times within 10 seconds
The meridian-E blind should move into the next highest intermediate
position:
• by micro-pulling (up to 25 mm) the meridian-E blind moves upwards
into the next intermediate position (25%, 50% or 75% or into the
client-specific position)
The meridian-E blind should stop in a new position:
• with a long pull on the bottom bar (>50 mm) the meridian-E blind stops
in the position it is in after pulling
SINGLE REMOTE CONTROL
Operate a meridian-E blind or a group with the single remote. With the
up and down buttons and the position buttons 25%, 50% and 75% your
meridian-E blind can be individually positioned. A reverse command stops
the meridian-E blind.
MULTI REMOTE CONTROL
With 6 individual and group channels and a main collector the multi
remote can operate several meridian-E blinds. With the upwards and
downwards buttons and the position buttons 25%, 50% and 75% your
meridian-E blind can be individually positioned.
A reverse command stops the meridian-E blind.
Furthermore, the multi remote also provides a special extra: If you shake
the remote control slightly, the last group selected will flash up.
QMOTION APP
Using the QMotion App, you can operate your blinds easily from your
smartphone or tablet:
• you will receive the app for your smartphone or tablet PC free of charge
as a download in the Apple AppStore or Google Play
• required equipment: App control QSync
Subject to technical changes
up
25%
50%
down
75%
up
25%
single/
50% group channels
75%
down
main collector
o
%
EN | 17