Montage mit Einzelträgern | Assembly with individual brackets
1
Wandmontage | Wall mounting
Deckenmontage | Ceiling mounting
2
Träger positionieren und montieren | Positioning and mounting of bracket
3
Rollo einsetzen | Insert blind
Stift eindrehen
Rollo einsetzen
Screw in pin
Insert blind
Ein Wechsel der Bedienseite ist nur werkseitig möglich.
Side on which operating chain is mounted can only be changed at the factory.
Wand-Montage mit Montageprofil | Wall mount with mounting profile
1
Wandmontage | Wall mounting
2
Montage des Profils mit Clip A oder Spannriegel B
Mounting of the profile with clip A or clamping
piece B
Spannriegel B
Clamping piece B
Clip A
Stift herausdrehen
Screw out pin
Die Anzahl der Clips oder Spannriegel richtet sich nach der Rollobreite.
The number of clips or clamping pieces depends on the width of the blind.
Decken-Montage mit Montageprofil | Ceiling mount with mounting profile
3
Montage des Profils mit Clip A
1
Mounting of the profile with clip A
4
Montage des Profils mit Spannriegel B
2
Mounting of the profile with clamping piece B
Die Anzahl der Clips oder Spannriegel richtet sich nach der Rollobreite.
The number of clips or clamping pieces depends on the width of the blind.
Deckenmontage | Ceiling mounting
3
Deckenmontage des Profils mit Clip A
Ceiling mount of the profile with clip A
Empfohlener Wandabstand ca. 4 cm!
Recommended distance from wall
approx. 4 cm!
Deckenmontage des Profils mit Clip A
oder Spannriegel B
Ceiling mount of the profile with clip A or
clamping piece B
Spannriegel B
Clamping piece B
4
Deckenmontage des Profils mit Spannriegel B
Clip A
Ceiling mount of the profile with clamping piece B