JAB QMotion meridian-E Rollo Montage- Und Programmieranleitung Seite 20

É
UPPER END POSITION
Adjustment options in the upper end-position
In the upper end-position three functions can be retrieved one after the other. These are to be selected in a
r
staggered fashion.
The length of time for which the up button is pressed is decisive for the functionality.
q
1. After approx. 5 seconds: adjustment of the upper end-position
Optical response: blind moves approx. 15 cm downwards and 10 cm upwards again
(1st response)
2. After approx. 10 seconds: learn remote control
Optical response: blind moves to the 75% position (2nd response)
3. After approx. 15 seconds: factory reset (complete reset)
Optical response: blind moves upwards a little (3rd response)
Adjustment of the upper end-position
1. Press the up button and the meridian-E blind moves into the previous end position.
2. Hold the up button until the meridian-E blind reacts (up-down movement).
3. Pull the meridian-E blind at least 15 cm downwards, motor reacts (up-down movement).
4. Adjust requested end position.
5. Press the up button and hold until the meridian-E blind reacts (up-down movement).
6. Press the up button again to move to the adjusted end position.
EN | 20