Baxtran BS-TRI/3 Bedienungsanleitung Seite 12

7.4 CHECK INTERNAL COUNTS
When you enter the setup menu, display shows "F0 CAL". Press
press key to enter. The display shows internal counts. Press
7.5 SET THE LOCAL GRAVITY*
When you enter the setup menu, the display shows "F0 CAL". Press
GrV", and press
location and to return to the setup menu.
7.6 SET AUTO POWER OFF
When you enter the setup menu, the display shows "F0 CAL". Press
OFF", and press
tes). Press key to confirm and return to the setup menu.
7.7 CHANGE CAPACITY*
When you enter the setup menu, the display shows "F0 CAL". Press
CAP" and press
Press the key to confirm and return to the setup menu.
7.8 SET CHECKING WEIGHING FUNCTION
When you enter the setup menu, the display shows "F0 CAL". Press
CHK", and press
key to confirm. Second, choose the low point, press the
confirm, and return to the setup mode.
7.9 SET BEEP MODE
When you enter the setup menu, the display shows "F0 CAL". Press
bEP", press key to enter. Press
confirm, and return to the setup menu.
7.10 SET A/D SPEED
When you enter the setup menu, the display shows "F0 CAL". Press
SPd", and press
key to confirm, and return to the setup menu.
7.11 SET MULTI-TARE FUNCTION*
When you enter the setup menu, the display shows "F0 CAL". Press
and press key to enter. Press
and press key to confirm, and return to the setup menu.
7.12 RESET FACTORY SETTINGS*
When you enter the setup menu, the display shows "F0 CAL". Press
rt" and press key to reset factory settings.
12
key to enter. Press
key to enter. Press
key to enter. Press the
key to enter. First, choose the high point, press
key to select the beep mode (0, 1 o 2), and press
key to enter. Press
key to activate (on) or desactivate (off) the multiple tare function,
key until display shows "F2 INP" and
key to edit the digits and press
key to select the auto power off time (0, 3, 5,10 or 20 minu-
key to change current capacity (3, 6, 15,25 or 30kg).
key to edit the digits and press
key to select the A/D speed (7.5, 15 o 30), and press
USER'S MANUAL BS-TRI
key to return to the setup mode.
key until the display shows "F3
key to change the
key until the display shows "F4
key until the display shows "F5
key until the display shows "F6
key to edit the digits and press
key until the display shows "F7
key until the display shows "F8
key until display shows "F9 tAr"
key until the display shows "F10
EN EN
to
key to