Baxtran BS-TRI/3 Bedienungsanleitung Seite 10

The LCD display will show a value and some marks under the digits.
Zero indicator.
Stability indicator.
Tare indicator, current scales in net weight mode.
Battery low. If the display show this symbol, please charge battery immediately.
Current Weighing Mode.
Charging Indication.
6. OPERATIONS
Power ON/OFF.
Switch on the scale by pressing
If you want to switch off press the key again.
6.1 ZERO OPERATION
You can press the
of power up zero. This will usually only be necessary when the platform is empty. When the zero point is
obtained the display will show the indicator for zero.
The scale has an automatic rezeroing function to account for minor drifting or accumulation of material on
the platform. However you may need to press the
are shown when the platform is empty.
Note: if current weight more than ±2% of capacity, Zero function will disable.
6.2 TARE OPERATION
Place a container on the platform, a value for its weight will be displayed.
Press the key to tare the scale. The weight that was displayed is stored as the tare value and that
value is su tracted from the display, leaving zero on the display. The "NET" indicator will be on.
When the container is removed a negative value will be shown. If the scale was tared just before removing
the container this value is the gross weight of the container plus all product that was removed. Press
key again for to clear the current tare weight.
6.3 CHARGE WEIGHING UNIT
Press and hold
6.4 SET BACK LIGHT
In the weighing mode, press and hold
Display will be show "BK-AU".
Press key to change display to:
• BK- AU to set back light turn on automatically
BK- OFF to set back light turn off always
•
• BK- ON to set back light turn on always
10
. The display is switched on and the self test is started.
key at any time to set the zero point from which all other weighing, within 2%
key in the weighing mode to change the weighing unit kg / g.
key.
USER'S MANUAL BS-TRI
key to rezero the scale if small amounts of weight
EN EN