Profile PLUG-IN Bedienungsanleitung Seite 34

1. Press the "I/0" switch on the side of the unit to the "I" position to
switch on the heater, the power indicator lights up and the LED
display shows "0F".
2. Then press the switch Then press the switch
this button continuously, you can switch between "HH" and "LL"
and "On/Off ". If the LED display shows "0F" it means the fan is
off , "HH" means "HIGH" (high) level, "LL" means"LOW" (low)
level.
Press the " + " button to increase the temperature setting in high
3.
and low mode. Highest 35° C and 95° F.
Press the " - " button to lower the temperature setting in high
4.
and low mode. A minimum of 15° C and 59° F.
5. Press this button Press this button
and "°C".
6. Press this button Press this button
1. Switch timer off :
When the heater is on, press When the heater is on, press
changes from the"temperatur"option to the "hours"option for
the timer. Keep pressing the timer button to change the
number of hours the heater has to work before turning off . The
hour options for the timer range from 0 to 24 hours (in 1-hour
increments).
2. Switch timer on:
With the heater switched off , press With the heater switched off , press
will show the "hours" option for the timer. Keep pressing the
timer button to change the number of hours you want the
heater's internal clock to count down before it switches itself
on. The hour options for the timer range from 0 to 24 hours (in
1-hour increments).
To deactivate the automatic switch-off timer, press the "Timer"
button until the LED display shows "0".
, the fan starts working. If you press , the fan starts working. If you press
for 3 seconds to switch between" for 3 seconds to switch between"°F"
to set the timer (0-24 hours). to set the timer (0-24 hours).
, the digital display , the digital display
, the digital display , the digital display