Profile PLUG-IN Bedienungsanleitung Seite 33

USER MANUAL
Note: If you switch off the heating, only the heating process. The fan
continues to blow for about 30 seconds to allow the internal parts to
cool down. After 30 seconds, the heater switches off automatically.
1. Align the heater vertically or horizontally. To do this, press the
dial on the plug and turn the plug until it snaps back into place.
2. Plug the heater into a suitable socket, observing all installation
instructions and turning on the on/off switch on the side of the
heater.
DO NOT plug this heater into a surge protector. This heater must
3.
be plugged in upright. DO NOT use this heater lying down.
4. This control panel is a touch screen that produces a dripping
sound when a button is pressed.
5. You can also operate the heater with a remote control.
6. This unit is only intended for use in well-insulated rooms or for
occasional use.
Note: The distance between the bottom of the heater and the ground
should be more than 30 cm, the distance between the side of the
heater and the wall or other object should be more than 50 cm.
EN