Charging; Power On/Off - Ezviz Rc3P Bedienungsanleitung

Charging

You have two ways to charge the Robot.
Automatic recharging: the Robot will automatically return for recharging after the cleaning
task is completed.
Manual recharging:
• The Robot needs to be fully charged (approximately 5 hours) to ensure a normal
operation.
• After the Robot is docked with the Auto-empty Base, the Auto-empty Base will start to
collect dust.
• If the Robot is stucked or cannot find the Auto-empty Base, please manually put the
Robot back to the the Auto-empty Base.

Power On/off

Power on: • Press and hold the
Power off: When the Robot is not in the Auto-empty Base, press and hold the
button for 4s on the operation panel.
• After the Robot is docking to the Auto-empty Base, it will be powered on
automatically.
4s on the operation panel.
After power the Robot off, you cannot use the remote control to operate it.
Short press Short press when pausing to when pausing
Short press when pausing
to begin automatic recharging.
to begin automatic recharging.
begin automatic recharging.
14
button for