Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ELECTRIC DIAGRAM
POWER
INPUT
INSTRUCTION
1. Note
- Place your refrigerator where the plug is easily accessible.
- Keep the refrigerator out of direct sunlight.
- Do not place it next to heat-generating appliances.
- Do not place it directly on the ground; use a suitable stand.
2. Very important
- The refrigerator performs best at 16-32°C. It should be powered off if the ambient
temperature is below 10°C.
- After plugging it in, let it cool for 2-3 hours before adding beverages.
- Good ventilation is crucial to prevent damage to the internal PCB and to extend the
refrigerator's life.
- The refrigerator has an automatic defrosting system, so manual defrosting is not
needed.
3. Power supply
- Connect the refrigerator to a properly earthed socket, following relevant country
regulations.
- Check the voltage and frequency on the data label (located on the side) to ensure they
match your local supply. If they don't, do not plug it in.
Power source board
Lamp
NTC
Temperature controller
Heat sink FAN
Heat sink FAN
Cold sink FAN
5
Thermoelectric
Module
Werbung
