Segway GT 3 Bedienungsanleitung Seite 4

EN
Handlebar Functions
Name Function
Power Button Power on/off
Light mode switching
Left Control
Switch
Confirm unlock password
Mode switching
Activate Ultra Boost Mode
Right Control
Switch
Switch to Walk Mode
Throttle Speed up
Turn on/off the left/right
direction indicator
Direction
Indicator Button
Turn on/off emergency
flashers
Horn Button Use horn
Bell Use bell
03
Operation Method
Press the Power Button to power on the scooter. Press and hold to power it off.
Rotate clockwise to switch Low Beam Mode, High Beam Mode, Auto Headlight Mode
and OFF successively. Rotate counterclockwise to go back to the previous light mode
When enable locking function, press Left Control Switch to confrim each password
entered. Rotate the switch to check the passwords entered.
Rotate clockwise/counterclockwise to switch between speed modes.
When scooter is in Race mode, press the Right Control Switch to activate the Ultra
Boost. After activation, press again or switch to another speed mode except RACE
Mode to exit Ultra Boost.
When the scooter is at a complete stop, press and hold the Right Control Switch to
switch to Walk Mode. Press and hold the Right Control Switch again to go back to the
previous speed mode.
Twist the throttle to speed up.
Press button to light up left/right signal, then the signal flashes, and press the button
again to turn it off.
Press and hold the left or right turn signal button to turn on/off emergency flashers.
Press and hold the horn button, and the horn will blare out constantly.
Press the button to use bell.
Throttle
Power Button
Right Control Switch
Horn Button
Left Control Switch
Direction Indicator Button
Bell