Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fox Transporter Power Barrows are designed to help transport fishing tackle only.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision
• Use for the transportation of fishing tackle only.
• Do not sit on or allow any persons to ride on the barrow.
• Load evenly, distributing weight across the whole load area.
• Ensure the barrow is on a flat stable surface before loading.
• Maximum load is 120kg.
• Please ensure all directions of travel are clear before initiating any
powered direction.
• Transporter Power Barrows can be "free wheeled" when the power
is not in use.
• The tire is tubeless and can be repaired similar to a Motorbike tire.
• WARNING: For the purposes of recharging the battery, only use
the detachable supply unit provided with this appliance
Assembly instructions
1. Lay the main frame on a flat surface so that the wheel
attachment spigots are facing upwards (1A) then slide the wheel
assembly onto the spigots (1B). Using the longest thumb screws,
secure the wheel to the frame (1C).
1A
2. Fold the rear legs/wheel frame out (2A) and lock into position (2B).
Now roll the barrow over and attach the handle assembly (2C).
Finally lock into position with the silver locking bolts (2D) and secure
tightly with the thumb screws.
POWER
POWER +
CTR020
INSTRUCTIONS
To ensure safe use, please follow the instructions outlined below:
1B
1C
• Lithium batteries and non-rechargeable batteries MUST NOT be
recharged.
• ONLY use with sealed rechargeable lead acid batteries!
• Dispose of used or faulty batteries responsibly.
• Do NOT mix old and new batteries
• Batteries are to be inserted with the correct polarity and care must
be taken not to short circuit them.
• When not in use ensure both power buttons are in the "off" position.
• If the appliance is to be stored unused for a long period, the
batteries should be removed
• Ensure all power switches are in the "off" position before adding,
removing or replacing the batteries.
• If the batteries become damaged or leak remove them in a well
ventilated area (preferably wearing gloves) and put the in a clear
plastic bag for responsible disposal. This way it is clearly visible
that the batteries are damaged and that they should be handled
with care. Keep batteries away from curious children or pets.
• There is a trip switch for safety. If no power, please check
this switch.
• For your safety, keep balanced on inclined or uneven surfaces.
2A
2C
POWER
POWER +
CTR021
2B
2D
Werbung
