Comfier CF-3001 Gebrauchsanweisung Seite 16

3.1 Controller Instructions
1. Place the massage mattress on the floor or on the bed.
2. Connect the adapter cable to the corresponding cable on the mattress.
3. Plug the home adapter into an outlet between 100-240V.
4. Turn on the device using the controller (Refer to below remote controller instruction.)
5. When finished place the controller in the pouch at the side of the mattress.
Vibration massage
intensity button:
Press to change the
intensity ,You may cycle
through,Low,Medium,High
Vibration massage
regions button:
Each massage regions may
be turned off or on as
desired by press the bu�on
for any combina�on of
regions and while any of
the 3 MODES are ac�ve.
Shiatsu button:
Press to turn on or off
shiatsu func�on on back
Demo button:
Quick demonstraton of
the different func�ons.
The L.E.D.lights will blink
to indicate the ac�ve
func�ons. Once complete,
the device will
automatcally turn off.
Power button:
turn the device ON
or OFF
16
Vibration Mode button:
Press to change the MODE
between M1 to M3.
Rolling button:
press to ac�vate Rolling
func�on, the massage
heads travel up & down
across the muscle gently.
Con�nue pressing the
bu�on to adjust the width
of the massage heads to
custom fit the body.
Back spot button:
Press to keep back shiatsu
in one area.
Use the ARROW bu�ons
to adjust the roller
posi�on up or down
Shiatsu massage zone
button:
you can choose upper,
lower or full back
Heat button:
Turn ON/OFF the
heat func�on