Switching On The Monitor - Waeco Mobitronic Rv-Rmm-153 Montage- Und Bedienungsanleitung

RV-RMM-153_de_en_dk.book Seite 41 Freitag, 23. Januar 2004 2:20 14
All manuals and user guides at all-guides.com
LCD Monitor
7.2 Setting the LCD monitor
The LCD monitor has OSD menus, i.e. you can make all settings using the
menus on the screen. Use the selection buttons on the monitor (fig. 5.4,
page 5) or on the remote control (fig. 6.4 and 5, page 5) to select the desired
menu and the parameter to be modified. The current settings for the para-
meter are displayed on the monitor.
Call up the OSD menus as follows:
Press the "MENU" button (fig. 5.3, page 5) on the LCD monitor ...
Or press the "MENU" button on the remote control.
The "IMAGE MENU" menu appears on the monitor.
If one of the two buttons is pressed again the subsequent menu is called up.
The menus are arranged in the following sequence:
Picture parameters (IMAGE MENU)
Video source (INPUT)
Audio parameters (SOUND MENU)
7.3

Switching on the monitor

Press the "Power" button (fig. 5.3, page 5), to switch on the monitor ...
Or press the "Power" button on the remote control.
If you have connected and selected a video source, its picture will be
shown on the LCD monitor.
Using the LCD monitor
41