Installing The Lcd Monitor; Tools Required - Waeco Mobitronic Rv-Rmm-153 Montage- Und Bedienungsanleitung

RV-RMM-153_de_en_dk.book Seite 36 Freitag, 23. Januar 2004 2:20 14
All manuals and user guides at all-guides.com

Installing the LCD monitor

6 Installing the LCD monitor
6.1

Tools required

For installation and assembly you require the following tools:
Drill bit set (see fig. 1.1, page 3)
Drill (see fig. 1.2, page 3)
Screwdriver (see fig. 1.3, page 3)
Set of ring or open-ended spanners (see fig. 1.4, page 3)
Measuring ruler (see fig. 1.5, page 3)
Hammer (see fig. 1.6, page 3)
Centre punch (see fig. 1.7, page 3)
For making and testing the electrical connection the following tools are
required:
Diode test lamp (see fig. 1.8, page 3) or voltmeter (see fig. 1.9, page 3)
Crimping tool (see fig. 1.10, page 3)
Insulating tape (see fig. 1.11, page 3)
Cable bushing sleeves, if necessary
To secure the cable you may require additional screws and cable binders.
36
LCD Monitor