Crivit DS-MULTIX400 Gebrauchsanweisung Seite 13

• The helmet is designed to absorb the energy
of a blow or a collision by destroying some
of its components. In case of a further blow
it wouldn't protect you any longer. After an
accident, the helmet must be replaced even
though it doesn't show external damages.
• Refrain from transporting your helmet by
hanging it onto any part of your motorcycle.
Keep it away from exhaust pipes and other
sources of heat.
• Never clean the helmet with solvents contain-
ing petroleum or scouring agents, neither the
outside nor the inside.
Always use pH-neutral detergent dissolved
in clean water. Careful rub with a soft cloth.
Then wipe dry with a lint-free cloth.
The pad may be cleaned with a little soap
using a soft brush.
• Only use genuine spare parts for your helmet.
• Only use the sun shield in daylight! Never use
at twilight or at night.
Product Characteristics
ECE-R 22.05
Homologation
This helmet is in compliance with
ECE-R 22.05 standards and
is homologised accordingly.
The ECE-R 22.05 standard consists of uniform
conditions for the approval of protective hel-
mets and its visors for drivers and passengers of
motorcycles and mopeds. The basic principles
for these tests are the so called ECE-Regulations
of the Economic Commission for Europe.
Significant Tests of the
ECE-Regulation 22.05
• Shock absorbance
• Dynamic test of wear features
• Field of vision test
• Design strength
• Sustainability test (Strip-off test)
• Chin straps and lock test
• Shear test for outside edges
• Friction performance test of the outer shell
• Visor test
(mechanical and visual characteristics)
• Chin bar, chin part damping test
Voluntary product testing
certificate
The TÜV Rheinland emission certificate indi-
cates products tested for contaminants and
according to current knowledge pose no risks
to the health.
Inside Padding with Coolmax
Inserts
Coolmax
high-performance fabric fibre
that supports its wearers during sport activities.
Based on the patented DuPont-fibre technology,
Coolmax transports moisture from the body to
®
the fabric surface where it dries quicker than
with any other fabric.
The specially developed fibres of INVISTA that
are used for Coolmax
®
moisture away from the body to the surface of
the fabric where it has the opportunity to evap-
orate quickly. At the same time, the uniquely
formed fibres offer maximum breathing activity,
even in wet conditions. In addition, the breath-
ing activity improves the heat regulating effect.
Cheeks, forehead and neck pads of this article
are equipped with Coolmax
HeiQ Fresh Tech
®
HeiQ
Experience the feeling of
lasting freshness through the power of silver,
keeping you odour-free all day long.
The helmet liner contains a biocide agent
(HeiQ Fresh Tech) for an anti-bacterial,
®
odour-inhibiting lining treatment. Active ingredi-
ent: silver adsorbed to silicon dioxide (nano).
Breath deflector and visor
ventilation
The breath deflector (7)
de creases fogging of the visor
due to exhaled air.
Additionally, the air
circulation in the visor area is
improved.
Emission
®
by INVISTA is a
®
-fabrics transport the
.
®
Textile freshness
®
GB 15