Installing The Seat - Huffy 360 Battery Ride-On Bedienungsanleitung

Installing the Fenders
STEPS - Note - Fenders are marked (R) (right) and (L) (left):
1. Position each Fender so that Tabs line up with mounting Slots
2. Press firmly and evenly until all Tabs snap into place.

Installing the Seat

STEPS:
B
NOTE: Bolts may be captive in Seat. If so, do
not remove from Seat.
1. Tilt Seat so that front edge Tab
edge of control Cowling.
2. Position Seat in place as shown so that
mounting holes
B
3. Install 4 Screws
Not Overtighten.
R
C
fits under
A
line up.
evenly and securely. - Do
A
A
B
C
L
.
A
13