ISOtunes PRO Aware 2.0 Bedienungsanleitung Seite 5

EN
and maintained in accordance with the
manufacturer's instructions.
• The hearing protector is worn at all times in
noisy environments..
• The hearing protector is regularly inspected
for serviceability.
If these recommendations are not adhered to,
the protection afforded by the hearing protector
will be severely impaired.
Additional Notes
ISOtunes PRO Aware 2.0 is compliant with
Bluetooth® V5.4 We do not guarantee
compatibility of all functions on every
Bluetooth®-enabled device. Please check your
device's user manual for compatibility and
functionality.
For additional information or questions about
ISOtunes® products or spares and accessories,
please contact our support team.
The earplugs are provided with level-dependent
attenuation. The user should check correct
operation before use. If distortion or failure
is detected, the user should refer to the
manufacturer's advice for maintenance and
replacement of the battery.
FCC Warning
FCC ID: 2AJRDIT-36B
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Any Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates uses and can radiate radio frequency
8
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
IC: 29416-IT36B
This device contains licence-exempt
transmitter(s)/ receiver(s) that comply with
Innovation,Science and Economic Development
Canada's licence-exempt RSS(s). Operation is
subjec to the following two conditions:
(1) This device may not cause interference. (2)
This device must accept any interference,
including interference that may cause undesired
operation of the device.
SAR warning
This equipment has to subject to ISED SAR
(Specific Absorption Rate) exposure test,
this equipment is designed to meet the
requirements for exposure to radio waves
established by the ISED.
UK & Europe
uk-eurosupport@isotunes.com
North America
support@isotunes.com
1-844-396-3737 or
1-317-740-0419
Monday-Friday 9-5 ET
This product is certified and monitored by:
PZT GmbH, NB 1974
Bismarckstrasse 264 B, 26389
Wilhelmshaven, Germany
Hereby, Haven Technologies declares ISOtunes
PRO Aware 2.0 (IT-39B) is in compliance with
the Regulation (EU) 2016/425 (PPE), Directive
2011/65/EU (RoHS) and Directive 2014/53/
EU (RED).
The full text of the EU declaration of conformity
is available at the following internet address:
ISOtunes.eu/documents.
1974
EN
9