Midea MERU280FEE02 Bedienungsanleitung Seite 17

When the fridge power is on
• All temperature icons shine within 3s after power on, for power on at the first time,
the default set temperature is -20℃.
• After that every time you start the fridge, it will run in accordance with set t
temperature before last power off.
• After 30s of unmanned operation, the indicator light goes out. When adjusting the
gear, you need to press the key "A" to light up the indicator, and then press the key
"A" again to adjust the gear.
EN
Opening warning and alarm control
• There is no door opening prompt tone; there is an open door alarm tone: when the
refrigerator door is not closed for two minutes after it is opened, the buzzer will
sound until the door is closed.Press the B button to cancel the buzzer alarm,it is
recommended to close the door in time.
Display of normal running
• On the occurrence of a failure, the corresponding icons will give a combined blink.
lf no failure, the screen displays the seting temperature of the refrigerator room.
the error codes and types are shown as follows:
Refrigerator:
Eror Code
E1
E5
E6
E7
E10
Freezer:
Eror Code
E1
E5
E6
E7
E9
E10
Error Description
Temperature sensor of
refrigerator room fail
Defrosting sensor of
refrigerator room fail
Communication error
Ambient temperature sensor fail
Sticking problem with button
Error Description
Temperature sensor of freezer
room fail
Defrosting sensor of freezer
room fail
Communication error
Ambient temperature sensor fail
High temperaturealarm in
freezing chamber
Sticking problem with button
Display
Icon" "& icon"2 "shine at same time
Icon" "& icon"3 "shine at same time
Icon"2 "& icon"4 " shine at same time
Icon" "& icon"4"shine at same time
Icon"2 "& icon"3 " shine at same time
Icon" "& icon"-24 "shine at same time
Icon" "& icon"-22 "shine at same time
Icon"-24 "& icon"-20 " shine at same time
Icon" "& icon"-20"shine at same time
Icon"-24 "& icon"-18 " shine at same time
Icon"-24 "& icon"-22 " shine at same time
13
Display