How To Install The Removable Airbag System; Storage; Cleaning - Alpride 3.0 Airbag System Bedienungsanleitung

7.3 HOW TO INSTALL THE REMOVABLE AIRBAG SYSTEM

Insert the airbag system through the side of the airbag compartment.
Run the cable under the compression strap, Pass the trigger handle through the hole between the shoulder strap and the airbag pocket,
attach the trigger handle. Close the shoulder strap pocket and close the zip.
Attach the 5x hooks, fold the airbag, close the zip.

7.4 STORAGE

Store your ALPRIDE 3.0 AIRBAG System in a dry place at room temperature.
ln the case of prolonged storage, it is advisable to remove the cartridges and pull the handle to relax the firing-pin spring.
The backpack and cartridges must be kept away from children.
ALPRIDE SA cannot be held responsible for any consequences of incorrect storage of the ALPRIDE 3.0 AIRBAG System.

7.5 CLEANING

Wash the backpack with water only (no detergent). Ensure the pack is completely dry before reusing it, to prevent ice from forming.
The inflator must be cleaned carefully with a microfibre cloth.
ALPRIDE SA cannot be held responsible for any consequences of incorrect cleaning of the ALPRIDE 3.0 AIRBAG System.
10
USER MANUAL / ENGLISH