Battery Replacement; Technical Specifications - Allegion Simons Voss Locknode Radio Kurzanleitung

8. Battery replacement

4. Reconnect the power supply or replace the batteries.
9 LED lights up constantly red.
5. Release the Init button while the LED is constantly red.
All WaveNet information in the LockNode is deleted.
9
You can re-integrate the LockNode into your WaveNet (see
WaveNet manual).
The SmartIntego variant (SI.N.IO) can only be reset in the
SmartIntego Manager.
8. Battery replacement
2
1. Screw of the lid.
2. Remove the old batteries.
3. Insert the new batteries.
4. Screw the lid back on.
Batteries are replaced.
9

9. Technical specifications

Dimensions
37xØ53 mm, suitable for
standard flush-mounted
box (DIN 49073 part 1)
32 / 116 | EN