Werbung
31 / 116 | EN
LockNode is installed.
9
6. Signalling
Normal operation
LED
flashes red twice
flashes red/green
Signal test
LED
flashes one time
flashes two times
flashes three times
7. Hardware reset of external LockNodes
You can reset WaveNet Manager-enabled LockNodes
(recognisable by WNM in the article number):
1.
Disconnect the LockNode from the power supply or re-
move the batteries.
2. Wait for about 20 seconds.
3. Press and hold the Init button.
Meaning
Initialization is complete.
Data is transferred.
Signal quality
poor
OK
Optimum
6. Signalling
Werbung
