Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Precautions
Location
Using the unit in the following locations can result in a
• In direct sunlight
• Locations of extreme temperature
• Excessively dusty or dirty locations
• Locations
of excessive
vibration
Power supply
Please connect the designated AC adaptor to an AC outlet of the correct
voltage. Do not connect it to an AC outlet of voltage other than that for which
your unit.is intended.
Handling
To avoid breakage. do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, Wipe it with a clean, dry cloth. Do not use liquid
cleaners such as benzene or thinner, or cleaning compounds or flammable
polishes.
Keep this manual
Afterreading this manual, p leasekeepit for laterreference.
Keeping fore•gn matter out of your equipment
• Neverset any containerwith liquidin it near this equipment.If liquidgets into
the equipment, it could cause a breakdown, fire, or electrical shock.
• Be careful not to let metal objects get into the equipment.
slip into the equipment, unplug the AC adaptor from the wall outlet. Then
contact your nearest Korg dealer or the store where the equipment
purchased.
CE mark for European Harmonized
CE mark which is attached to our company's products of AC mains operated apparatus until
December 31. 1996 means it conforms to EMC Directive (89/336/EEC) and CE mark
Directive (93/68/EEC).
And, CE mark which is attached after January 1. 1997 means it conforms to EMC Directive
(89/336EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive {73/23/EEC).
Also, CE mark which is attached to our company's products of Battery operated apparatus
means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).
KORG products are manufactured under strict specifications and voltages required by each
country. These products are warranted by the KORG distributor only in each country. Any
KORG product not sold with a warranty card or carrying a serial number disqualifies the
product from the manufacturer's/distributor'swarranty and Eability.This requirement is for
your own protection and safety.
? & Rota
70
malfunction.
or humidity
If something does
was
Standards
NOTICE
b
(x 7 z 2 FLED,äkT)
ALEDQX7
THE
This equiprmenthas been tested and tound to comply with the limitsfor a Class B digital
device, pursuant to Part 15 of the FCC Rules. Tnese limits are designed to provide
reasonable protection against harmful interference
equipment generates. uses. and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference "II not occur in a
particular instalation.
If this equipment does cause harmful interference to radio or television
reception,
can be determined by turning the equÜnent Offand On.the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the eq.'ipment and receiver.
• Cmnect the equipment into an outlet on a circuit differentfrom that to which the receiver is
connected.
• Consult the dealer or an experienced radiofTV technician for help,
Unauthorized changes or modification to this system can void the user's authority to operate
this equipment.
Troubleshooting
If you suspect a malfunction, first check the following pojnts. II this does not
solve the problem, contact your dealer or a Korg service center.
I. The power does not turn on.
Are batteries
installed?
Alternatively,
is an AC adapter connected?
Is the plug inserted all the way into the input jack?
2. Effect sound is not produced.
Is the effect switch in the bypass position?
• Press the effect switch. (Effect LED is lit)
Have the battenes
run down?
If the batteries run down, the program LED and effect LED will become darker
when they light. if this happens, replace the batteries as soon as possble.
3. Effect
is unstable.
Have the batteries
run down?
* If the batteries run down, the program LED and effect LED will become
darker. If this happens, replace the batteries as soon as possible.
4. Knob positions
* The knobs of this unit are used to set parameters, and once the settings have
been stored, changing the program will cause the sound of the program to be
heard, regardless of the positions of the knobs.
77 7
—
168
168
466
531
810
168
b tc
KORE
FCC
REGULATION
WARNING
a residentiat installation. This
do not match the sound.
—
Ä
1-15-12
1-11-17
(03)3323-5241
100-51
(052)832-1419
(06) 374-0691
1-3-25
2
(092)531-0166
1-15-12
(03)3309-7004
f
168
775
IF
3325-5691
0 1997 KORG
Inc.
Werbung
