Cleaning and care
Although this appliance
automatically defrosts, a layer of
frost may occur on the freezer
compartment's interior walls if the
freezer door is opened frequently or
kept open too long.
If the frost is too thick, choose a time
when the freezer is nearly empty and
proceed as follow:
1.Remove existing food and
accessories baskets, unplug the
appliance from the mains power
and leave the doors open.
Ventilate the room thoroughly to
accelerate the process.
2. When defrosting is completed,
clean your freezer as described
above.
Warning
Do not use sharp objects to
remove frost from the freezer
compartment.
Only after the interior is completely
dry should the
appliance be swit ched back on
and plugged back into the mains
socket.
Defrosting
Freezer compartment
This compartment defrosts
automatically
Door seals cleaning
Take care to keep door seals clean.
Sticky food and drinks can cause
seals to stick to the cabinet and tear
when you open the door. Wash the
seals with a mild detergent and
warm water. Rinse and dry them
thoroughly after cleaning.
This product contains a light source
of energy efficiency class G on the top
of the refrigerating chamber.
To replace the LED light, the
belowsteps can be followed:
Replacing the LED light
1.Unplug your appliance.
2.Remove light coverby pushing up
and out.
3.Hold the LED coverwith one hand
and pull it with the other hand while
pressing the connector latch.
4.Replace LED light and snap it
The LED light must not be replaced
by the user! If damaged,
contact the customer heipline for
assistance.
Warning
29