Hisense RB3K330SAIC Benutzerhandbuch Seite 108

Reverse the door
4.Loose screws used to fix the middle
hinge and remove middle hinge part.
Then remove the lower door.
5. Place the lower door on a smooth
surface with its panel upward. Loose 2
self-tapping screws , detach the
stopper,the door backstop and the
shaft sleeve, then install the stopper,the
door backstop and the shaft sleeve to
the left side with 2 self-tapping screws .
6. Change screw hole covers on middle
cover plate from left to right (as shown
in figure below).
7. Lay the refrigerator on soft foam
packaging or similar material. Remove
the adjustable bottom feet parts, then
remove the lower hinge part by
unscrewing the screws . Change screw
hole covers on lower cover plate from
left to right .Finally unscrew the bottom
hinge axis and remove it to the hole
which is other side and screw it.
26