Hisense RB3K330SAIC Benutzerhandbuch Seite 103

Display controls
Connecting your refrigerator
After installing the Connectlife app, sign
in or create an account and follow
these steps:
1.Ensure the appliance is powered on
and the display panel is active. You'll
know it's ready when the panel lights up.
2.Press and hold the Wi-Fi button for 3
seconds until you hear a beep and see
the" "light flashing after it constantly
on for a few seconds.
The appliance will remain in pairin mode for a maximum of 5 minutes.
The factory reset your network settings, press and hold the Wi-Fi button
for 6 seconds. You will hear two beeps once the appliance is reset.
After resetting, the appliance will automatically go into pairing mode.
A solid Wi-Fi light indicates theappliance is successfully connected to the
home network.
3.Ensure Bluetooth is enabled on your
phone and open the ConnectLife app.
Look for the pop-up indicating that a
new appliance has been found. Tap the
button on the pop-up and follow the
instructions to proceed.
4.If a pop-up doesn't appear, tap the
button called "Add appliance" or "+" in
the app.
5.Locate "Refrigerator" in the device list
and select it.
6.Follow the instructions in the app
connect your refrigerator. Once the
setup is complete, your refrigerator will
appear on your home screen.
Note
21