Assembly Process - Next Level Racing Gtlite Junior Bedienungsanleitung

1
USING NLR LITE SERIES T-JUNCTIONS
LOOSEN
TO OPEN
Open/close the T-Junction sliding mechanism by loosening/tightening the T-Knob. Make sure the T-Junction is
tightly closed by twisting the T-Knob clockwise before using the Cockpit to avoid failure.
2

ASSEMBLY PROCESS

Unfold the Backrest and insert the Locking Pins, ensuring they are fully visible through the entire Adjustment
Bracket.
TIGHTEN
TO CLOSE
T-KNOB
Repeat
on Other
Side
7
Video Instruction: bit.ly/nlrbuild
Do not adjust the T-Junctions while user
is sitting in Cockpit, make sure user is
out of the Cockpit before adjusting.
Ensure the T-Junctions are fully tightened
Make sure the hubs are tightened fully
before using the Cockpit. Twist the
before using the cockpit. (Spin the hub
T-Knob clockwise to secure it.
clockwise to ensure it is fully tight)