Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Cleaning and user maintenance shall not be made by children without supervision.
• WARNING: In order to avoid a hazard for very young children, this appliance should be
installed so that the lowest heated rail is at least 600 mm above the floor.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Instructions for using the controller:
I. Technical parameters
1. Power supply: AC230V/50Hz;
2. Temperature setting range: 40~60°C;
3. Timing setting range: 1-24H;
II. Function Description:
Countdown Shutdown: After setting the countdown, the timer will automatically shut down
when the timer is completed, and the timing data loop is available.
III. Panel operation instructions:
1. In standby mode, it
not on; Press
Power on, the display shows the current set temperature;
2. Press
the button to set the temperature, the setting range is 40~60°C, and the
increment is 5°C every time you press it;
3. In the power-on state, press the
will start counting down. The setting range is 1-24 hours.
4. Press and hold
5. WiFi function:
5.1 Scan the QR code below to download the Tuya Smart APP, or download the Tuya
Smart APP from the mobile app store.
5.2 Turn on Bluetooth and 2.4G WiFi on the mobile phone at the same time, enter the app
and click the plus sign in the upper right corner to select and add the device, and
operate the network according to the interface prompts (if the WIFI indicator is always
on, you can restore the factory settings by pressing and holding the
seconds, and then connect to the Internet).
is always on, and the display screen and other key lights are
key to set the shutdown timer. Once set, the system
the button for 5 seconds to restore factory settings.
4
button for 5
Werbung
