Werbung
Verfügbare Sprachen
Verfügbare Sprachen
30133L
21. Use UP/DOWN button to view onscreen
prompts.
22. Press Y button and following screen shows:
23. Actuate the pedal gently to raise the pressure to 20-24 bar and keep it for 5s.
24. Follow onscreen instructions to complete operation of current phase:
- The fill level of wheel brake circuit HZ2 (secondary brake circuit) is in order.
- Release brake pedal.
- Checking fill status of wheel brake circuit HZ1 (primary brake circuit).
25. Press Y button or gently actuate and then release the pedal to continue, and the device starts to
communicate with the vehicle.
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Strasse 65
D-42897 Remscheid
18
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
Werbung
