Werbung
Verfügbare Sprachen
Verfügbare Sprachen
30133L
9. Use UP/DOWN button to view onscreen
prompts.
10. Press Y button to continue.
■
The black block"
"in the screen indicates specified
pressure range of current phase.
11. Operate the brake pedal gently to raise the
pressure to 4.5-5.5 bar and hold it for 5 seconds as
instructed.
If the pressure can not reach the specified range
for a long period, hold N button for about 2s to exit,
and a "User Aborted!" message shows on the
display.
Whenever you operate the pedal too hard and the
pressure is raised beyond the specified range of
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Strasse 65
D-42897 Remscheid
16
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
Werbung
