Operation And Handling; Operation And Handing - Caso WineControl Originalbetriebsanleitung

15 Operation and Handing

15° angle
warming
caso WineControl
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages.
Pick up the wine cooler carefully and place it on a dry and
stable surface. Ensure that the adaptor is attached to the
wine cooler.
Place the bottle into the wine cooler.
► Please pay attention, that the bottle touches the interior well.
Attach the adapter plug to appliance first, then plug cord
into the wall outlet.
Put the appliance at either angle 15º, or angle 85º.
► You may choose either angle 15º,or angle 85ºdirection when
operates for different kinds of wine. It is suggested that you
put the device at angle 85º for chilling wine, the device work
more effectively at the angle 85º direction.
► When you want to rotate the body of this appliance to
85° angle
choose either 15º or 85º tilting angle position, you must hold
chilling
the base of this appliance in advance.
Put the switch "on' and put the knob to desired temperature.
You can put the knob to set the temperature to "5"to fully
chill; you can put the knob to set the temperature to "50"to
fully warm.
When the drink is chilled or warmed to the suitable
temperature, put the power switch 'OFF' and unplug the
adaptor from the wine cooler. Bring the wine cooler to the
table or to wherever desired and use it.
Should for any reason you need to change desired
temperature, you can slowly slide the switch direction until
the desired temperature is reached.

Operation and Handling

Please note
Please note
30