Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SOLIS Jacky-engl._2014 26.02.14 15:03 Seite 68
▲
W A S H I N G T H E N E C K A N D
B A C K W A R M E R
•
Power plug, connection adapter with power cord and control element must never
come into contact with water or any other liquids.
•
Before washing, always pull the plug
and remove power cord and control
element from the appliance. To re-
move the control element, pull off the
connection adapter.
The low-maintenance material and the removable control element allow
washing the neck and back warmer at max. 30°C on a delicate cycle, us-
ing mild wool washing powder. Choose a low spinning speed and definitely
do not use an additional spin cycle.
At low temperatures (below 40°C), you can tumble dry the neck and back
warmer.
Alternatively, you can let the neck and back warmer dry out lying down. Do
not use pegs, as they might damage the heating wires.
W A S H I N G T H E C O V E R
When the neck and back warmer and the cover are completely dry, the ap-
pliance can be reconnected to the mains and be operated again. Reconnect
the connection adapter to the jack. The neck and back warmer must only
be operated with the provided control element (type reference on woven
label).
68
Caution: Do not chemically clean, chlorinate or bleach
the appliance or cover. Do not iron!
The cover without the appliance can be washed at 40°C on a
delicate cycle, using mild washing powder. You can tumble dry
the cover at low temperatures (below 40°C).
jack
connecting adapter
to disconnect:
pull
Werbung
