Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14. The temperature indicator flashes, but the time remains unchanged. The appliance
heats up and the baking process starts, the appliance fan starts up. This process
takes approx. 20 minutes.
15. When the process is complete, a beep sounds three times.
16. Now switch off the appliance with the "POWER" button and let it cool down.
17. The fan will continue to run for some time.
18. The appliance is now ready for use.
PREHEATING
1.
The programmes have a preheating phase.
2.
This is especially important when baking at very high temperatures in order
to obtain a perfect baking result.
3.
During the preheating phase, the pizza stone must be in the appliance.
4.
If the appliance is still very hot from the previous baking process, it will skip
the preheating phase.
OPERATING THE APPLIANCE
Preparing the appliance
1.
Note: If you have switched on the appliance but have not entered any
settings for a long time,
2.
the standby mode is activated after some time. You must then switch the
appliance on again to enter settings.
Stand 17.9.2024
Copyright UNOLD AG | www.unold.de
The appliance and the pizza stone are very hot during and after
operation! Avoid contact with hot surfaces of the appliance –
there is a risk of burns!
Do not leave the appliance unattended when using high
temperatures – risk of fire!
Keep children away from the appliance!
The appliance and the pizza stone are very hot during and after
operation! Avoid contact with hot surfaces of the appliance –
there is a risk of burns! Do not leave the appliance unattended
when baking at high temperatures – risk of fire! Keep children
away from the appliance! Do not use baking paper or baking foil
due to the high temperatures in the appliance. Always remove
all films and papers from e.g. frozen foods, even if they can be
left on during baking according to the manufacturer.
DE
EN
FR
NL
IT
ES
PL
41 von 140
Werbung
